Electrical Installation Condition Report

by John
(London, England)

Need an EICR for your catering van or trailer? Use a registered NICEIC or NAPIT electrician who follows BS 7671 Section 717.

Need an EICR for your catering van or trailer? Use a registered NICEIC or NAPIT electrician who follows BS 7671 Section 717.

All mobile catering vans and trailers which are used regularly and have mains powered equipment need an EICR completed by a professional, qualified electrician every year, but I can't find any examples on an EICR specifically for mobile and transportable units, does anyone have a copy of there last EICR I can have a look at please?

Comments for Electrical Installation Condition Report

Average Rating starstarstarstarstar

Click here to add your own comments

Nov 12, 2025
Rating
starstarstarstarstar 		Where to get an Electrical Installation Condition Report (EICR) for a Catering Van or Trailer
by: MobCater

Hello,

The Short answer:
You won’t find people sharing their own EICR reports because they are private.
But you can use the official BS 7671 EICR form as a guide. Any qualified electrician who is NICEIC or NAPIT registered can complete one for your catering van or trailer.

Ask if they understand Section 717 – Mobile or Transportable Units.

Where to get one done

Use a registered electrician:

NICEIC "Find a Tradesperson" – www.niceic.com/find-a-tradesperson

NAPIT Member Search – search.napit.org.uk

Electrical Safety First – www.electricalsafetyfirst.org.uk

The correct form to use

Use the BS 7671:2018+A2:2022 model EICR (the official IET form).

This is the standard used for all buildings and also for mobile catering units.

Section 717 of BS 7671 has special rules for mobile or transportable units like catering vans.

How often?

There is no single rule for everyone, but most event organisers and councils expect:

A valid EICR less than 12 months old

PAT testing on all appliances

What to tell the electrician

When booking, tell the electrician:

It’s for a mobile catering van or trailer.

The van has a 230V 16A or 32A hookup (or generator).

It needs RCD protection (30 mA).

All metal parts and sinks should be earthed (bonded).

Ask for test results to be recorded (continuity, insulation, polarity, etc.).

Include PAT test records for all plug-in appliances.

Make sure labels are added showing test date and next inspection due. Hope this help answer some of your questions.

Disclaimer:
This information is for general guidance only.
It does not replace professional electrical advice. Always use a qualified and registered electrician to carry out inspection and testing work in line with the current BS 7671 Wiring Regulations. Rules and requirements can change, so always check with your local authority or event organiser for the latest safety standards.

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Mobile Catering Licence .


Enjoy this page? Please pay it forward. Here's how...

Would you prefer to share this page with others by linking to it?

  1. Click on the HTML link code below.
  2. Copy and paste it, adding a note of your own, into your blog, a Web page, forums, a blog comment, your Facebook account, or anywhere that someone would find this page valuable.