New: the free 12-step MobCater startup guide is now in the app. Open the app →

How Much Space Do You Need Between Gas Appliances in a Catering Van?

by Kaz
(Rotherham )

Burgundy box body catering van serving chips to customers on a South Yorkshire industrial estate

Burgundy box body catering van serving chips to customers on a South Yorkshire industrial estate

Hi, i currently have a catering van with a parry countertop fryer. I am looking at purchasing a larger fryer but have limited space. I was told once by a gas engineer that there needs to be a minimum gap in between each appliance installed. If this is true what is the distance required? So i can workout which size fryer to buy. Many thanks. Great site

Comments for How Much Space Do You Need Between Gas Appliances in a Catering Van?

Average Rating starstarstarstarstar

Click here to add your own comments

Nov 20, 2026
Rating
starstarstarstarstar
How Much Space Do You Need Between Gas Appliances in a Catering Van?
by: MobCater

Kaz, your engineer was right that the gaps matter, but there isn't one fixed distance that applies to every catering van, so nobody can give you a single number to measure against.

The gap comes from the manufacturer's installation instructions for each appliance. Every commercial gas fryer comes with a manual that states the minimum clearances at the sides, at the back and above, and how close it can sit to anything that can burn. A Gas Safe registered engineer has to install the appliance to those instructions, so those are the figures he'll be working to when he signs your van off. They vary from model to model, which is why two fryers of the same width can need quite different amounts of room.

So I'd do this the other way round. Before you buy anything, measure the space you have, then download the installation manual for each fryer on your shortlist. Most manufacturers, Parry included, put them on their websites. Add the clearances to the width of the fryer itself and you'll see straight away which ones will really fit. Send the manual for your favourite to your engineer before you order. It takes him five minutes to check and it can save you buying a fryer you can't use.

There are two things specific to fryers that I'd keep in mind. Hot oil shouldn't sit tight up against an open flame, so if the fryer is going next to a hob or a chargrill, expect your engineer to want either a clear gap or a steel divider between them. And keep it away from the sink, because water splashing into hot oil is how a lot of nasty burns happen in a small van.

A bigger fryer also burns more gas, and that catches people out more often than the space does. Your pipework, regulator and cylinders were sized for what's in the van now, so a larger burner may mean changes there. It will put more heat and fumes into the van too, so your canopy and ventilation need to cope with it. Ask your engineer to look at all of that at the same visit, and make sure the new fryer has a flame failure device and can be fixed down so it can't move while you're driving.

If you want to compare sizes, there are LPG fryers at mobcater.com with the dimensions listed. Whichever one you choose, have it fitted and tested by a Gas Safe registered engineer who is qualified for LPG and mobile catering, and get your gas safety certificate updated to show the new appliance.

Best of luck

David

Disclaimer: Gas installation and maintenance must be carried out by a Gas Safe registered engineer. Never attempt gas work yourself. Check gassaferegister.co.uk for qualified engineers in your area.

Try the free MobCater App, our startup checklist and guide walks you through every step: https://www.mobcater.co.uk/mobile-catering.html

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to LPG Gas Equipment Certificates.

Your first trading day is closer than you think

Start free today with the 12-step guide, and skip the trial and error most new caterers learn the hard way.

Start the free 12-step guide