New: the free 12-step MobCater startup guide is now in the app. Open the app →

Can I Connect an Imported Italian Catering Van to UK LPG Bottles?

by Paul Henderson
(Glasgow, Scotland)

Teal Italian catering van with side hatch serving hot food to customers on a Glasgow street

Teal Italian catering van with side hatch serving hot food to customers on a Glasgow street

Hi, I recently imported a catering van from Italy to the UK. The problem I have is that the connector at the ends of the pipes don't fit the UK gas bottles? Is there a convertor or attachment that I can get to allow me to connect to UK LPG bottles?

Thanks,
Paul

Comments for Can I Connect an Imported Italian Catering Van to UK LPG Bottles?

Average Rating starstarstarstarstar

Click here to add your own comments

Nov 19, 2026
Rating
starstarstarstarstar
Can I Connect an Imported Italian Catering Van to UK LPG Bottles?
by: MobCater

Paul, you can buy adapters that join continental fittings to UK cylinders, and you'll see them sold for touring motorhomes. I wouldn't use one on a working catering van though, and I doubt any engineer would sign the van off with one in place. The connector is only the part of the problem you can see.

Your van was built around Italian cylinders, which means the regulator, the hoses and quite possibly the appliances themselves were set up for the gas and pressures used over there. In the UK we run catering equipment on propane at 37 mbar, through a UK regulator that screws straight into the cylinder valve. If you simply adapt the end of the pipe, you could be feeding your appliances at a pressure they were never set up for. That shows up as poor yellow flames, sooting and carbon monoxide, which is the last thing you want inside a van.

So the right fix is to have the supply side changed properly instead of adapted. A Gas Safe registered engineer who holds the LPG and mobile catering qualifications can fit a UK propane regulator and new hoses to the British standard, and that part is usually a modest job. Gas Safe covers Scotland as well, so you'll find engineers around Glasgow on the register. Check the back of their card, because not every gas engineer is qualified for LPG in catering vehicles.

While they're there, ask them to look at the data plate on every appliance. It should show that the appliance is approved for use in Great Britain and suitable for propane at 37 mbar. If it isn't, the manufacturer may supply a conversion kit with the correct jets, which the engineer can fit. If there's no kit, that appliance may need replacing, and it's better to find that out now than at your first event.

They'll also check the van against the UKLPG Code of Practice 24, which covers things like flame failure devices on each burner, ventilation, and where the cylinders are stored. Once it all passes you'll get a gas safety certificate, and you'll need that for your insurance, for event organisers and for most councils. Under the Gas Safety (Installation and Use) Regulations 1998 this isn't work you can do yourself.

My advice is to book the engineer before you spend anything else on the van, and take photos of the data plates to send them first. If any appliances do need replacing, you can compare commercial LPG equipment at mobcater.com.

All the best

David

Disclaimer: Gas installation and maintenance must be carried out by a Gas Safe registered engineer. Never attempt gas work yourself. Check gassaferegister.co.uk for qualified engineers in your area.

Try the free MobCater App, our startup checklist and guide walks you through every step: https://www.mobcater.co.uk/mobile-catering.html

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to LPG Gas Equipment Certificates.

Your first trading day is closer than you think

Start free today with the 12-step guide, and skip the trial and error most new caterers learn the hard way.

Start the free 12-step guide